Browse Knob; Page Buttons; Exit Button; On/Off Button - Kemper PROFILER Bedienungsanleitung

14 KEMPER PROFILER
(3)

Browse Knob

In Browse Mode this knob can be used to quickly browse the list of Rigs within your current View. You can then
select one of the listed Rigs. At this time you could either load the selected Rig or delete it with the soft but-
ton "Delete". In Performance Mode, it can be used to quickly browse the list of available Performances. Turn the
BROWSE knob to display a list of available items; further turns will select between them.
When a Module or Section is in focus, this knob selects between the corresponding Presets. You can also store
your own Presets by using the STORE button.
✔ ✔
Note: Remember the difference between turning TYPE and BROWSE knob. Using type will only change the Ef-
fect Type while all parameters will stay the same. This makes it easy to compare different Effect Types while
keeping all effect parameters unchanged; browsing Effect Presets with BROWSE will load other sets of param-
eters, including the respective effect type.
(4)

Page Buttons

When a Module is in focus, these buttons will switch between pages if more than one is available.
(5)

Exit Button

Press this to return to the "Play Page".
(6)

On/Off Button

This button switches the currently selected Module or Section on and off. The light of the Module or Section but-
ton shows you if a Module is active or bypassed. You can also switch a Module on and off by pressing the Module
button itself.