Herunterladen Diese Seite drucken

Lock Button; Copy And Paste Buttons; Store Button - Kemper PROFILER Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für PROFILER:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 34
(7)

Lock Button

Use the LOCK function to prevent a Section or a Module from being changed when you switch Rigs. To lock or
unlock individual Modules, press their respective buttons while holding the LOCK button. Essentially, you can
think of a locked Module as being "global".
To get an overview of the lock status of all Modules, press and hold LOCK - all locked Modules will be lit, while all
non-locked Modules remain unlit.
The Lock function works independently between Performance Mode and Browse Mode. So you could, for ex-
ample, lock your Input Section in Browse Mode while keeping it unlocked in Performance Mode, which happens
to be the default setting.

Copy and Paste Buttons

Use the COPY and PASTE buttons to grab a Module and copy its data to another similar location. For example,
you can copy and paste the settings of one stomp to another, either within the same Rig, or another Rig entirely.
To do this, select a Module and press COPY. Next, select a destination Module and press PASTE.
In general, you can use common sense to determine if the Profiler will let you copy settings from one Module to
another. For example, you cannot copy the Reverb settings to the Amp Module. However, it is possible to copy
the content of a Stomp to Effect X or MOD in the Effects Section. Go ahead and try whatever you want; you will
be alerted if what you're attempting is not possible.

Store Button

Use the STORE button on the left side of the display to save any changes you have made to a Module, Rig, or
Performance. Store allows you to save a Rig or a Module to the permanent memory.
Pressing STORE in Browse Mode will offer you three different options via the soft buttons: "Replace" will over-
write the currently selected Rig with the new version while keeping the original name, "Store as" will save the Rig
under a new name, and won't delete the original Rig. "Rename" will allow you to change the name of the current
Rig.
(8)
(9)
GETTING STARTED
15

Werbung

loading