Back Panel Overview; Main Outputs - Kemper PROFILER Bedienungsanleitung

20 KEMPER PROFILER

Back Panel Overview

SPEAKER OUTPUT
11 8 - 16 Ohm
OUTPUT POWER: 8 OHM: 600W RMS / 16 OHM: 300W RMS
Dedicated speaker/cabinet output.
Do not connect this output to any grounded
equipment, such as a power soak or DI box -
otherwise severe damage will occur.
4 RETURN INPUT
12
S/PDIF
OUT IN
10

Main Outputs

This is your stereo MAIN OUT. Use these outputs to connect to a mixing desk in a recording studio, or to the
front-of-house mixer in a live situation. These outputs deliver the entire Rig: Amp, Cabinet, and all Effects. You
have a choice of XLR (balanced) or quarter-inch TS-jacks (unbalanced). The XLR outputs are protected against
48V phantom power fed by a mixing desk. However, you should avoid feeding phantom power into the Profiler if
you want the best audio quality. Like all inputs and outputs, it offers a GROUND LIFT to prevent a hum loop.
!
WARNING: DO NOT OBSTRUCT VENTILATION GRILLS
ATTENTION: NE PAS OBSTRUER LES GRILLES DE VENTILATION
ALTERNATIVE DIRECT OUTPUT /
INPUT SEND
GROUND GROUND
LIFT LIFT
MIDI
THRU OUT IN
9
(1)
3 2
MONITOR OUTPUT
LEFT
GROUND
LIFT
SWITCH / PEDAL NETWORK USB
1 2
7
8
1
MAIN OUTPUT
RIGHT LEFT RIGHT
GROUND
LIFT
POWER
6
AC ~ 100-125V or ~ 190-245V
max. 10A / 50Hz-60Hz
5
ETL LISTED
CONFORMS TO
UL STD 60950-1
CERTIFIED TO
CAN/CSA STD
C22.2 NO. 60950-1