Operational characteristics
The "Alarm mute" function is active. See the "Dräger X-am 7000
Technical Manual" for details of how to activate and deactivate
this function
Fast configuration switching for the IR sensor is active. See the
"Dräger X-am 7000 Technical Manual"
Fast configuration switching for the CAT sensor is active. See the
"Dräger X-am 7000 Technical Manual"
Fast configuration switching for the EC sensor is active. See the
"Dräger X-am 7000 Technical Manual"
Fast configuration switching for the PID sensor is active. See the
"Dräger X-am 7000 Technical Manual"
The instrument is in Application mode. See the "Dräger X-am 7000
Technical Manual"
The instrument is transferring data to a PC. See the "Dräger
X-am 7000 Technical Manual"
44
4.5
Switching off the Instrument
Press and hold the keys » ▲ « and » ▼ «
(longer than 3 seconds).
–
A count-down is displayed to indicate
when the three second period has
elapsed:
When the countdown reaches zero:
The signal tone sounds and the alarm lamp lights for about
one second and the instrument then switches itself off.
–
The green operating LED is switched off.
–
If the keys are released before the count-down reaches zero,
the instrument remains in measuring mode.
4.6
Switching on the display illumination
To switch on the display illumination during measuring mode:
Press any key: the display illumination is switched on for about
30 seconds.
The display illumination is also switched on automatically if an
alarm is generated.
X – am 7000
_ 3 _
X – am 7000
_ 2 _
X – am 7000
_ 1 _
Dräger X-am 7000