Saving The User Configuration (Database) Of The Cash Register - Code 348 - Olivetti NETTUN@7000int'l Anwenderhandbuch

SAVING THE USER CONFIGURATION (DATABASE) OF THE CASH
REGISTER – CODE 348
Code 348 saves the user configuration (DATABASE) of the cash register.
Operating Procedure
1.
2.
3. .3. .4. .8. .X.
Insert the USB pen into the cash register.
Note: If you try to save the data without first inserting the pen, an
error is displayed: "STICK NOT INSERTED".
Select SET (CONFIG) mode for the register.
On the display the message appears: "348-WRITING DATA/WAIT"
and writing of the data starts.
a. If the data is written to the pen successfully, a message is
displayed "WRITING EXECUTED/REMOVE STICK"
b. If, however, errors were encountered during writing, an error is
displayed: "WRITE ERROR/REMOVE STICK".
Note: Try repeating the procedure, making sure that the pen is
inserted correctly. If the error re-occurs, contact Technical
Services.
Remove the pen.
On removal of the USB pen, the machine automatically enters SET
mode.
9-5