INITIALISING THE ELECTRONIC JOURNAL
Before the electronic journal (EJ) can be used, it must first be initialised.
1. When the cash register is powered on after inserting a new (or deleted) EJ, it
executes automatically an initialisation procedure, displaying the message below
on the touch screen:
2. Select OK on the touch screen to start the procedure.
3. Select OK in the next screens that appear on the touch screen until the following
message is displayed:
4. Select OK to end the initialisation procedure.
if any error messages appear on the touch screen during the initialisation
Note:
procedure, consult the "Troubleshooting" manual for more information.
10-2
JOURNAL NOT INIT'D.
OK
JOURNAL NOT INIT.
INIT. CONCLUDED
OK