Olivetti NETTUN@7000int'l Anwenderhandbuch Seite 105

EJ LABEL
To make archival of the EJ memory cards easier, a label is provided that the user
can fill in with the related data.
To enter the data, proceed as follows:
1. Power off the cash register and disconnect it from the 220V electrical supply.
Wait for approximately 20 seconds.
2. Open the hatch (1) and push the card inwards to eject it (2).
1
3. Fill in the label with the related data.
Matr...........
D.G.F.E. N. ....
Data inizio .....
Data fine .....
4. Insert the SD card into the slot (2) so that it clicks into place. Close the hatch.
2
5. Insert the power plug into the 220V electrical socket, and power on the cash
register using the On/Off key.
Cash register serial number
Sequential number of device
Initialisation date of device
Date last data registered on device
2
10-3