Restoring The Cash Register Programming - Code 346 - Olivetti NETTUN@7000int'l Anwenderhandbuch

RESTORING THE CASH REGISTER PROGRAMMING – CODE 346
The SET 346 option restores the following types of information to the cash register:
descriptive part (all data saved by the user excluding accounting data) of all the
databases present on the cash register
all the cash register presetting parameters, excluding logos.
Operating Procedure
1.
2.
3.
.3. .4. .6. .X.
4.
5.
9-4
Insert the USB pen into the cash register.
Note: If you try restoring the data without first inserting the pen, an
error is displayed: "STICK NOT INSERTED".
Note: Before proceeding you may have to print the management
reports indicated by the cash register. You will not be allowed to
proceed with the restore operation until you print them.
Select SET mode for the register.
On the display the message appears:
"DESTRUCTIVE OPER. PROCEED?"
Press the X key to continue.
You are asked if you want to format or not:
"FORMATS ENABLED: 1, DISABLED: 0.
If you choose 1 the data in the cash register is deleted, if you choose 0
the data is maintained.
At the end, a message is shown on the screen:
"346-READING DATA/WAIT" and reading of the data starts.
a. If the data on the pen is read successfully, the message is displayed:
"READ EXECUTED/REMOVE STICK"
b. If, however, errors have occurred during reading, the warning
appears "READ ERROR/REMOVE STICK".
Try repeating the procedure, making sure that the pen is
Note:
inserted correctly. If the error re-occurs, contact Technical
Services.
The procedure has completed. The register prints a ticket (ECR
CONFIGURATION) that shows the current configuration of the cash
register. The ticket is saved in the EJ.
Remove the pen. When the USB pen is removed, the machine
automatically enters SET mode.