Programming An Item (Plu) - Code 802; Modifying, Deleting, Printing And Formatting The - Olivetti NETTUN@7000int'l Anwenderhandbuch

PROGRAMMING AN ITEM (PLU) – CODE 802
Operating Procedure
1.
When using a barcode reader, pass the optical reader
2.
over the barcode of the item so that it is read. The code is
displayed on the operator display and an acoustic signal
is emitted indicating that reading has terminated.
To manually enter the barcode:
- Select the type of barcode from: EAN-UPC, C39.
- Enter the alphanumerical code of the item to save
using the keypad.
- Press the .X.
programmable function.
To save items without the assistance of a barcode, select
3.
the type C39 that allows descriptive strings to be entered
for an item or for generic PLUs (such as Coffee).
For example:
- When you select C39, on the screen appears:
PLU CODE C-39
- Enter the descriptive string you want (as in the
previous example, coffee) and press
- You are then requested to enter the PLU CODE.
Enter the description of the item inserted (as in the
previous example, coffee).
The description inserted in this field will be printed on
the ticket and shown in the ticket on the touch screen.
- Next enter the parameters for the item (prices,
department linked etc.) to associate a key to the item.
If you want to change the number of department to which a PLU is linked, this change
is only possible after running a Z reports indicated.
MODIFYING, DELETING, PRINTING AND FORMATTING THE DATA
RELATED TO AN ITEM (PLU) – SET 804,803,801,800
The following SET options are available:
SET 804 to modify an item (PLU)
SET 803 to delete an item (PLU)
SET 801 to return the programmable parameters of the PLUs to their factory values
SET800 to print how the items (PLUs) are programmed.
key to confirm and proceed to the next
INSERTION
.8. .0. 2. .X.
.X.
4-7