Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATOR MANAGEMENT
The cash register can handle different operators using the machine on the basis of
workshifts. Operator management can follow one of the following schemes:
Cashier-only operation: at the start of every ticket entry of the cashier or
supervisor is required. The
personally perform the logout sequence.
On logout, if printing is enabled, the shift closure report is printed.
Waiter-only operation: at the start of every ticket entry of the waiter is required (in
that, when a ticket is closed, the associated waiter is always automatically
disabled). At the end of a workshift, the waiter must personally perform the logout
sequence to close their shift, and optionally print their report.
Mixed operation: at the start of the first ticket entry of the cashier or supervisor is
required, then, before each new ticket is started, a waiter can log in by entering
their personal code. When the ticket is printed the cashier/supervisor identifier
appears on the ticket, as well as that of the waiter if applicable (the waiter is
automatically disabled on closure of the ticket).
The cashier/supervisor remains enabled until they personally perform the logout
sequence. Each waiter must also perform the logout sequence to close their own
shift, and optionally print their report.
When the cashier/supervisor logs out, a separate shift closure is generated (with
report printing if enabled) and all waiters associated with them during their shift are
automatically logged out if they have not already logged out individually (and shift
closure report optionally printed).
This functionality is accessed by pressing the [Operator] key in the Functions>ECR
Functions environment, and is used - before starting a sales transaction - to select
the operator to whom the subsequent sales transactions are to be attributed,
This function is only available if it has been previously enabled using the code SET
370 in combination with SET 601 for programming the personal details of each
operator.
Note: if sales operations have been performed, report printing is requested.
1. Using the numeric keyboard, enter the code
.3. .7. .0.
followed by
2. 0 = Disabled (default setting)
1 followed by
2 followed by
3 followed by
3. Enable or disable shift closure report printing
0 followed by
1 followed by
2-16
.X.
.X.
= for cashiers
.X.
= for waiters
.X.
= for waiters/cashiers (mixed)
.X.
= to disable
.X.
= to enable
cashier/supervisor remains enabled until they
Werbung
Kapitel
Inhaltsverzeichnis
