Setting The Date And Time - Olivetti NETTUN@7000int'l Anwenderhandbuch

SETTING THE DATE AND TIME

To set the date and time, proceed as follows:
1. On the touch screen, select: [Functions] > Other Functions environment, by
pressing [Config]. The screen displays:
2. Using the numeric keypad, enter the code
.1. .5. .1. followed by
3. The default format for displaying the date is
DD/MM/YY and corresponds to selection 0.
Select 1 to display the date in the format MM/DD/YY
Select 2 to display the date in the format YY/MM/DD.
4. The default format for displaying the time is
24H, and corresponds to selection 1.
Select 0 to display the time in 12H format.
5. Enter the date and press .X. to confirm the date entered.
6. The time stored in the cash register is displayed.
7. Enter the time in the format: hh-mm-sec.
8. Press .X. to confirm the time entered.
Note:
Changing the date/time is not permitted unless the Z10 report has been run.
Example:
.1. .5. .1. followed by
DD/MM/YY followed by
24H followed by
01-01-2012 followed by
01:19:43 followed by
.X.
.X.
.X.
.X.
.X.
.X.
2-9