Selecting Operators - Olivetti NETTUN@7000int'l Anwenderhandbuch

4. Enable or disable Supervisor code request (Enter code:); enter 111111
0 followed by .X.
1 followed by .X.

SELECTING OPERATORS

The screen shows the list of operators saved on the cash register together with their
operator status. A scroll bar is provided allowing you to scroll through the list of
operators programmed.
Note: If the (*) character is present it indicates that a personal code is programmed
for the user.
Paul (*) - Supervisor
Gianni (*) - Cashier
Paola (*) - Staff
Close list
Key
Close list
Apply Selected
Operator
(Start of Shift)
Operator Logout
(End of Shift)
= to enable
= to disable
Operator
logout
Closes the window displaying the list of operators and returns to the
Functions screen,
Allows an operator to be selected in the list of programmed operators
with subsequent operations being attributed to them.
Select an operator.
Press the [Apply Selected Operator] key.
Insert code key.
Allows you to cancel the selection of an operator.
Select an operator.
Press the [Operator Logout] key.
Insert code key.
If printing is enabled, the shift closure report is printed.
7 8 9
4 5 6
1 2 3
.
0 00
Description
X C
%
Void
SUB
Total
Total
2-17