Connecting External Peripherals; Connecting An External Printer (Optional); Connecting A Barcode Reader (Optional) - Olivetti NETTUN@7000int'l Anwenderhandbuch

CONNECTING EXTERNAL PERIPHERALS

The devices most frequently connected are: Personal Computer, Barcode reader
able to handle the following codes: UPC A / UPC-E, EAN 13 / EAN 8, Code 39
(length 5-32), "Olivetti PR4 SL" Slip Printer, "Epson TM 290/295", "Star SP 298",
"Olivetti PRT100 Marker", Drawer, Management data acquisition/processing devices.
B
A
C

CONNECTING AN EXTERNAL PRINTER (OPTIONAL)

If you want to use an external printer purchased separately (such as an "Olivetti PR4
SL" or "Olivetti PRT100 Marker" model), ensure that the printer connector is of serial
type. According to your model, connect the printer to the serial connector A.

CONNECTING A BARCODE READER (OPTIONAL)

If you want use a barcode reader purchased separately, check the type of connector
it uses (USB or serial). The Barcode readers supported can handle the following
codes: UPC A / UPC-E, EAN 13 / EAN 8, Code 39 (length 5-32). According to your
model, connect to connector B or C.
1-14