Olivetti NETTUN@7000int'l Anwenderhandbuch Seite 15

5. With the cash register still powered
on, open the printer cover, press the
release lever (A) and remove the
paper roll.
The instruction "CLOSE COVER"
appears.
6. Close the upper unit of the printer
and wait until the instruction "ADD
PAPER" appears.
7. Press the release lever (A), load the
paper roll and close the upper unit of
the printer.
8. Wait until the message
"EXECUTED" appears.
9. After a few seconds, the cash
register powers off automatically.
10. The calibration is terminated.
If the calibration operation fails a
warning message appears "NOT
EXECUTED".
In this case, you should repeat the
calibration operation.
A
A
1-9