VOLTCRAFT WBM-460 Bedienungsanleitung Seite 60

REL Relative value measurement (delta symbol = reference value measurement)
MODE Toggle sub-functions
HOLD Freezes the current measurement, hold function is enabled
ESC Button to exit the settings menu
IR Infrared, toggle to the thermal imaging function
OL Overload = The measurement range was exceeded
OFF Move to this position to turn the multimeter off
True RMS Actual effective value measurement
MAX min. and max. measured data memory
PEAK Peak value display (Pmax/Pmin), 1 ms capture time
Diode test symbol
Acoustic continuity tester symbol
CAP Symbol for capacitance measuring range
Alternating current symbol
Direct current symbol
Symbol for AC and DC (combined)
Display of the pulse duration of the pos. half-wave
- Polarity indicator for current flow direction (negative terminal)
Warning symbol for voltages over 30 V AC/DC
Symbol for non-contact clamp-on ammeter measurement
Symbol for photo apparatus (save screen content)
Torch symbol
Symbol for inserted fuses
Symbol for locking open
Locked symbol
COM Connection for reference potential
mV Millivolt mode (exp. -3)
V Voltage mode (Volt = unit of electrical voltage)
A Current mode (Ampere = unit of electric current)
mA Milliamp mode (exp. -3)
µA Microamp mode (exp. -6)
Hz Frequency mode (Hertz = unit of frequency)
% Measurement function for pulse duration as a percentage (pulse-pause ratio)
60