Packet Data; Viewing Data Statistics; Viewing Encryption Status - Motorola MTP3250 Funktionsbenutzerhandbuch

2 Select Location → Backlog → Delete All.
4.17

Packet Data

NOTICE: This feature is a paid feature.
The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet
Protocol (IP).
NOTICE:
To transfer data from a standard computer over the air, connect the computer via the data cable
PMKN4129 with your radio. Your service provider has to setup additional applications on your
computer.
If set up by your service provider it is possible to accelerate the transmission by using the Multi-Slot
Packet Data (MSPD) Service.
4.17.1

Viewing Data Statistics

Procedure:
1 From the home screen, press the Menu key.
2 Select Packet Data.
NOTICE: Data services are only available in TMO Mode. The data option must be set to
Voice & Data or Data Only.
3 Select one of the following:
• Sent Data – the number of KBs sent and throughput since current Packet Data activation is
displayed.
• Received Data – the number of KBs received and throughput since current Packet Data
activation is displayed.
• Bandwidth – active data session percentage is shown.
• Failed Transfer – the percentage of failed sent/received packets.
NOTICE: N.A. – standby packet data session.
4.17.2

Viewing Encryption Status

Procedure:
1 From the home screen, press the Menu key.
2 Select Packet Data → Encryption.
3 The encryption state of the ongoing packet data session is displayed:
•
Packet Data Channel Clear
•
Packet Data Channel Encrypted
• Encryption N/A (clear)
Send Feedback
68015000899–FC (en-US)
Chapter 4: Main Menu
117