Changing Gps Accuracy; Packet Data; Viewing Data Statistics - Motorola MTP850 S Ausführliche Bedienungsanleitung

100 | Main Menu
Note: To refresh your position:
• Select Position — the radio refreshes its position automatically
• Press Refresh

Changing GPS Accuracy

Procedure:
1 From the home screen, press the
2 Select More . . . → Location → Accuracy.
3 Select one of the following:
• Medium (default) — Power consumption optimization is combined with less position accuracy.
• High – Better position accuracy is combined with less power consumption optimization.
Note: If connected to an external charging device, the radio automatically enters the High mode.

Packet Data

The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet Protocol (IP).
Note: To transfer data from a standard computer over the air, connect the computer via the data cable
PMKN4025 with your radio. Your service provider has to setup additional applications on your computer.
If set up by your service provider it is possible to accelerate the transmission by using the Multi-Slot Packet Data
(MSPD) Service.
Note: This is a selling feature.

Viewing Data Statistics

Procedure:
1 From the home screen, press the
2 Select More . . . → Packet Data.
Note: Data services are only available in TMO Mode. The data option must be set to Voice & Data or
Data Only.
3 Select one of the following:
• Sent Data — the number of KBs sent and throughput since current Packet Data activation is displayed.
• Received Data — the number of KBs received and throughput since current Packet Data activation is
displayed.
• Bandwidth — active data session percentage is shown.
• Failed Transfer — the percentage of failed sent/received packets.
Note: N.A. — standby packet data session.
Send Feedback | |
key.
MENU
key.
MENU