How To Operate; Inspection Before Starting - Yanmar 6LPA-DTZP Bedienungsanleitung

4. HOW TO OPERATE

Alcohol
Never operate the engine while you are under the influence of alcohol or
●
when you are ill or feel unwell as this results in accidents.
Exhaust Gas Poisoning
Be sure to establish good ventilation in the engine room with win-
●
dows, vents, or other ventilation equipment. Check again during
operation to be sure that ventilation is good. Exhaust gas contains
poisonous carbon monoxide and should not be inhaled.
Moving Parts
Do not touch the moving parts of the engine (propeller shaft, V-belt,
●
PTO-pulley, etc.) during operation or let your clothing get caught in
them as this can result in injury.
Never operate the engine without the covers on the moving parts.
●
Check before starting the engine to see that any tools or cloths
●
used in maintenance have been removed from the area.
Burns from Contact with Hot Engine Parts
The whole engine is hot during operation and immediately after
●
stopping. The turbocharger, exhaust manifold, exhaust pipe, and
engine are very hot. Never touch these parts with your body or
clothing.

4.1 Inspection Before Starting

Be sure to check the following items daily before starting the engine.
(1) Visual Check
Check for the following:
If any problem is found, do not use the engine until repairs have been completed.
●Oil leakage from the lube oil system. ●Fuel oil leakage from the fuel system
●Water leakage from the cooling water system ●Loosening or loss of bolts
●Damage to parts
(2) Checking and Resupplying Fuel Oil
Check the fuel level inside the fuel tank and supply with the recommended fuel if necessary.
3) Checking and Resupplying Engine Oil
(
①Check the engine oil level with the oil dipstick.
②If the oil level is low, supply with the recommended lube oil using the filler port.
Supply oil up to the maximum mark on the oil dipstick.
WARNING
WARNING
CAUTION
_ 25 _
→See 3.2
→See 3.3