Yanmar 6LPA-DTZP Bedienungsanleitung Seite 22

• Starting and stopping
Put the handle in NEUTRAL. This puts the
clutch in the disengage position (stop) and idles
the engine at a low speed.
• Forward
Move the handle from NEUTRAL to
▲ FWD (forward). This engages the clutch in
forward and simultaneously increases the
engine speed. Pushing the handle further in
the same direction increases engine speed
to full speed.
• Reverse
Move the handle from NEUTRAL to ▼
REV (reverse). This engages the clutch in
reverse and simultaneously increases the
engine speed. Pushing the handle further in
the same direction increases engine speed
to full speed.
• Free throttle operation
When the boat is stopped (clutch is in neutral position), the idling speed of the engine can be
increased in the following manner.
①Leave the handle lever in NEUTRAL.
②Disengage the clutch.
MT-3: Pull out the handle lever all the
way.
MV : Pull out the free throttle button
next to the handle lever.
③With the lever or button pulled out, move
the handle lever in either the forward or
reverse direction to increase idling
speed.
• Returning to normal operation from free
throttle operation.
MT-3: Return the handle lever to NEU-
TRAL. The lever will return auto-
matically to the normal position.
MV: Return the handle lever to NEU-
TRAL. Push the free throttle
button in.
MT-3
MV
MT-3
MV
_ 16 _
Optional
Optional
Optional
Optional