Check And Adjust Tightening Chain - Beta Motorcycles R12 Bedienungsanleitung

ChECK aNd adjuST
TiGhTENiNG ChaiN
Position the vehicle on the central bike
stand.
If the distance between tensioner and
swingarm is less than 10 mm proceed
with adjustment.
• Loosen the pin 1.
• Rotate register 2 until the distance be-
tween chain and swingarm is that recom-
mended above.
Rotate register 3 into the same position
as register 2.
Ensure the distance between tensioner and
swingarm is that recommended.
If the distance between tensioner and
swingarm is not that recommended pro-
ceed to readjustment.
Tighten the pin to the torque indicated.
1
3
45
4
10mm
2
60Nm
GB