Front Brake Lining Control - Beta Motorcycles R12 Bedienungsanleitung

4
GB
2mm

fRONT BRaKE liNiNG CONTROl

In order to verify the wear condition of front
brake is enough to view the caliper from
the bottom, where is possible to glimpse
the brake lining tails which will have to
show a brake of 2 mm in thickness. If the
stratum is lesser let's start replacing them.
Note:
Perform the check according to the times
shown in the table on page 48.
To replace, contact authorised Betamotor
customer service.
38