Adjusting The Spring Preload R10; Adjusting The Spring Preload R12 - Beta Motorcycles R12 Bedienungsanleitung

3
adjuSTiNG ThE SpRiNG
2
pRElOad R12
To adjust the spring preload, use the pro-
cedure described below.
Loosen counter-ring 1, rotate ring 2 clock-
1
wise to increase the spring preload (and
consequently the shock absorber preload)
or anticlockwise to decrease it.
After obtaining the desired preload, turn
counter-ring 1 until it stops against adjust-
ing ring 2.
For standard calibration, refer to page 15.
NOTE: for movement of the rings use a
specific sector key with square pin.
GB
30