Configuration
Changing the OSD key
The hotkey to open the OSD consists of at least one hotkey modifier (see Changing
hotkeys on page 32) and an additional OSD key. You can freely select these keys
from a number of selectable keys.
You can change both the hotkey modifier
How to change the current OSD key:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under
Key
when pressing the OSD key together with the hotkey modifier(s):
Num key (default)
Num
Pause
Pause key
Insert
Insert key
Delete
Delete key
Home
Home key
End
End key
PgUp
Page Up key
PgDn
Pace Down key
Space key
Space
5. Press
F2
to save your settings.
1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
4. Under
Hotkey
together with the hotkey modifier(s) to open the on-screen display.
Select the OSD key from the keys Pause, Insert, Delete, Home, Page Up,
Page Down, Num, End or Space.
5. Click
to save your changes.
OK
33 · G&D DP1.2-Vision-IP-Fiber
(default) to open the on-screen display.
System setup
and press
and press
Hotkey
, press
to select an OSD key. Now you can open the OSD
F8
tab.
, you can select an OSD key. The OSD key can be pressed
Ctrl
and the OSD key
Enter
.
.
Enter
on the directory tree.
Num
.