Establishing A Connection By Using A Terminal Emulator; Determining The Ip Address - G&D DP1.2-Vision-IP-Series Installation Und Bedienung

Further information

Establishing a connection by using a terminal emulator

How to establish a connection using a terminal emulator:
1. Start any terminal emulator (e.g.Tera Term oder PuTTY).
2. Establish a new connection via terminal emulator and enter the follwoing set-
tings:
 Bits per second:
 Data bits:
 Parity:
 Stop bits:
 Flow control:
3. Use the supplied USB service cable to connect the computer to the Service port on
the front panel of the user or computer module.

Determining the IP address

How to determine the IP address of a user or computer module:
1. Restart the user or computer module.
During the boot process, the terminal emulator shows various status messages.
2. After the boot process, the IP address and other
61 · G&D DP1.2-Vision-IP-Fiber
115.200
8
None
1
None
system information are displayed.