Establishing The Power Supply - G&D DP1.2-Vision-IP-Series Installation Und Bedienung

Installation
Connect the mouse and/or the keyboard of the local console to this
Keyb./Mouse:
interface.
Connect the monitor of the local console to this interface.
DP Out:
Establishing a connection to the Gigabit Ethernet
IMPORTANT: The devices use components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the Transmission interfaces and from the
cable plug.
Transmission|Tx: Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Gigabit Ethernet.
Transmission|Rx: Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Gigabit Ethernet.

Establishing the power supply

Main Power: Insert one of the supplied IEC cables here.
Red. Power: To provide a second, redundant power supply, connect a portable power
pack to this interface.
9 · G&D DP1.2-Vision-IP-Fiber