(De)Activating Signals - G&D DP1.2-Vision-IP-Series Installation Und Bedienung

Establishing a KVM-over-IP™ connection for the first time

(De)Activating signals

By default, the KVM switch transfers not only keyboard, video and mouse data but
also audio data between switches.
In addition, you can enable the transmission of RS232 data and, alternatively,
disable the transmission of audio data.
How to (de)activate the transmission of audio or RS232 signals:
1. Use the remote hotkey Ctrl+ Num to open the OSD of the computer module.
2. Select the row KVM connection and press Enter .
3. Under Activated signals use the arrow keys to check the box of the signal you want
to (de)activate and press F8 .
4. Press F2 to save your settings.
21 · G&D DP1.2-Vision-IP-Fiber