Changing The Video Mode Of Consoles - G&D DP1.2-Vision-IP-Series Installation Und Bedienung

1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click on the tab
the module).
CPU
Click on the tab
remote console (at the
4. Under
Permanent Access mode
 right for exclusive access is granted (default)
Enabled
Disabled  right for exclusive access is denied
5. Click to save your changes.
OK
Related topics:
 Operating the KVM extender exclusively on page 22
 Changing the video mode of consoles on page 38

Changing the video mode of consoles

In the standard configuration of the KVM extender, the computer's image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is shown again as soon as the user has finished their
inputs at the console.
on the directory tree.
if you want to adjust the right for the local console (at
Local
, if you want to adjust the right for the
Remote > General
CON module).
select one of the following options:
Configuration
G&D DP1.2-Vision-IP-Fiber · 38