Changing The Osd Key - G&D DL-DVI-Vision-CAT Installation Und Bedienung

Changing the OSD key

The hotkey to open the OSD consists of at least one hotkey modifier (see Changing
hotkeys on page 23) and an additional OSD key. You can freely select these keys
from a number of selectable keys.
You can change both the hotkey modifier
How to change the current OSD key:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under , press
Key
when pressing the OSD key together with the hotkey modifier(s):
Num  Num key (default)
Pause  Pause key
 Insert key
Insert
Delete  Delete key
 Home key
Home
 End key
End
PgUp  Page Up key
 Pace Down key
PgDn
Space  Space key
5. Press to save your settings.
F2
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on Configuration
3. Click on the tab
4. In the Hotkey field, select the OSD key to open the on-screen display when
pressed together with the hotkey modifier key(s).
You can choose between the keys Num, Pause, Copy, Delete, Home, End,
PgUp, PgDn and Space.
5. Click on Save
Ctrl
(default) to open the on-screen display.
System setup and press
Hotkey and press Enter
to select an OSD key. Now you can open the OSD
F8
KVM extender .
.
General and then on the tab
.
and the OSD key Num
Enter .
.
CPU .
G&D DL-DVI-Vision-CAT · 24
Configuration
.