Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Automatic closing of the OSD after inactivity
If desired, you can set the OSD to close automatically after a period of inactivity.
The period of inactivity can be defined by entering a value between
NOTE:
To disable the function, enter the value
How to change the period of inactivity after which the OSD closes:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Select the row
5. Enter the desired time range from
6. Press
to save your settings.
F2
1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
4. Under
Close OSD when inactive for [s]
from
5
to
99
seconds.
5. Click
OK
to save your changes.
(default) to open the on-screen display.
Console setup
and press
Personal Profile
and press
Close OSD when inactive for [s]
5
on the directory tree.
Remote > Extender system > Personal profile
, enter the desired time range
.
0
Enter
.
Enter
.
and press
Enter
.
to
seconds and press
99
G&D DP1.2-Vision-IP-Fiber · 58
Configuration
and
seconds.
5
99
.
Enter
.
Werbung
Kapitel
Inhaltsverzeichnis
