Support Of Special Keyboards - G&D DP1.2-Vision-IP-Series Installation Und Bedienung

Configuration

Support of special keyboards

The KVM extender supports special functions of some special keyboards.
Enable the support of such keys if you want to use them at the console.
How to enable or disable the support for special keyboards:
1. Press Ctrl+Num
2. Select the row
of a special keyboard for the remote console (at the
Select the row
support of a special keyboard for the local console (at the
3. Under
Enh. keyboard
no
PixelPower C
SKIDATA1
4. Press to save your settings.
F2
1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tab
board for the local console (at the
Click on the tab
cial keyboard for the remote console (at the
4. Under
PS/2 keyboard type
default
PixelPower Blue
SKIDATA1
5. Click to save your changes.
OK
49 · G&D DP1.2-Vision-IP-Fiber
(default) to open the on-screen display.
and press
Console setup
and press
Local console setup
press to select one of the following options:
F8
 disables support of special keyboards
 enables support of keyboard PixelPower Blue
 enables support of keyboard SKIDATA1
if you want to adjust the support of a special key-
Local
Remote > General
select one of the following options:
 disables support of special keyboards
 enables support of keyboard PixelPower Blue
 enables support of keyboard SKIDATA1
if you want to adjust the support
Enter
if you want to adjust the
Enter
on the directory tree.
module).
CPU
if you want to adjust the support of a spe-
module).
CON
CON module).
module).
CPU