Changing The Osd Key - G&D DP1.2-Vision-CAT Installation Und Bedienung

Configuration

Changing the OSD key

The hotkey to open the OSD consists of at least one hotkey modifier (see Changing
hotkeys on page 28) and an additional OSD key. You can freely select these keys
from a number of selectable keys.
You can change both the hotkey modifier
How to change the current OSD key:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
Key
when pressing the OSD key together with the hotkey modifier(s):
 Num key (default)
Num
Pause  Pause key
Insert  Insert key
Delete  Delete key
Home  Home key
End  End key
PgUp  Page Up key
PgDn  Pace Down key
 Space key
Space
5. Press F2 to save your settings.
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on Configuration
3. Click on the tab
4. In the Hotkey
pressed together with the hotkey modifier key(s).
You can choose between the keys Num, Pause, Copy, Delete, Home, End,
PgUp, PgDn and Space.
5. Click on
Save
29 · G&D DP1.2-Vision-CAT
(default) to open the on-screen display.
System setup and press
and press
Hotkey
, press to select an OSD key. Now you can open the OSD
F8
KVM extender
.
General and then on the tab
field, select the OSD key to open the on-screen display when
.
Ctrl and the OSD key
Enter .
.
Enter
.
CPU .
Num .