Freeze Mode - G&D DP1.2-Vision-IP-Series Installation Und Bedienung

1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
4. Under
Color depth
 transmits the image data with a maximum colour depth
24 Bit:
of 24 bits (default)
18 Bit:  reduces the colour depth of image data to 18 bits
5. Click OK to save your changes.

Freeze mode

If the cable connection between the computer module and the user module is inter-
rupted during operation, the KVM extender no longer displays an image at the remote
console.
Enable the Freeze mode if you want the last image that has been displayed at the user
module to be available until the connection is re-established.
To highlight an interrupted connection, the last available image can be displayed
with either a coloured frame and/or a
connection has been interrupted.
on the directory tree.
.
General
select one of the following options:
Frozen popup and the time passed since the
G&D DP1.2-Vision-IP-Fiber · 42
Configuration