Changing The Colour Of The Information Display - G&D DP1.2-Vision-IP-Series Installation Und Bedienung

Configuration

Changing the colour of the information display

By default, information display are shown in light green. You can adjust the colour
of the information display in your personal profile.
In addition to the default colour
black
green
dark blue
dark turquoise
yellow
fuchsia
white
How to change the setting of the information display:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under Display color
5. Press F2 to save your settings.
1. Click on IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
4. Under
Display colour
5. Click to save your changes.
OK
55 · G&D DP1.2-Vision-IP-Fiber
light green
(default) to open the on-screen display.
Console setup and press
Personal Pprofile and press
press F8 to select the desired colour.
Remote > Extender systems > Personal profile
you can select the desired colour.
the following colours are supported:
dark red
dark yellow
purple )
silver
blue
light turquoise
Enter .
Enter .
on the directory tree.
.