Changing The Timeout Of The Automatic Input Lock - G&D FIBREVision-MC4-ARU Installation Und Betrieb

Configuration

Changing the timeout of the automatic input lock

NOTE: This function can only be (de)activated in the setup menu.
If a user makes inputs through keyboard or mouse, the FIBREVision system auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is being made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The timing of the input lock can be adjusted from 1 to 90 seconds.
How to set the timeout of the automatic input lock:
1. Use the terminal emulator to establish the connection to the FIBREVision
system.
2. Use the arrow
3. Use the arrow
4. Use the numerical keys of the keyboard to input the desired value and press
the Enter key.
5. Press the Q
6. Press the
S
Related topic:
 Exclusive operation of the FIBREVision system on page 14
28 · G&D FIBREVision
keys to select the
keys to select the row
key to leave the Console Access menu.
key to save the settings.
Console Access row and press the
Timeout .
Enter key.