G&D DP1.2-Vision-IP-Series Installation Und Bedienung Seite 118

Configuration
How to select the video mode of a console:
1. Press Ctrl+Num
2. Select the row
mode for the remote console (at the
Select the row
video mode for the local console (at the
3. Under Video mode
always on
switch off
4. Press F2 to save your settings.
1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click on the tab
console (at the
Click on the tab
the remote console (at the
4. Under
Image display
 (default)
always on

off for actions at remote/local console
5. Click to save your changes.
OK
Related topics:
 Changing the time span of the input lock on page 36
 Right for exclusive access to the console on page 37
39 · G&D DP1.2-Vision-IP-Fiber
(default) to open the on-screen display.
Console setup and press
Local console setup
press F8 to select one of the following options:
 image is always on (default)
 switch off image for actions at the other console
if you want to adjust the video mode for the local
Local
module).
CPU
Remote > General
CON
select one of the following options:
Enter if you want to adjust the video
CON module).
and press Enter if you want to adjust the
CPU module).
on the directory tree.
if you want to adjust the video mode for
module).