G&D DP1.2-Vision-IP-Series Installation Und Bedienung Seite 90

Installation
Connecting the console monitor
DP Out: Connect the console monitor.
Connecting audio and RS232 interfaces
Line In: If required, connect a microphone to this interface.
Speaker: Connect the speakers or another audio output device.
Connect the serial end device to this interface.
RS232:
Establishing a connection to the Gigabit Ethernet
IMPORTANT: The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE: Remove the protection caps from the Transmission interfaces and the cable
plugs.
Insert the LC plug of a fibre optic cable, which is available as acces-
Transmission|Tx:
sory, into this interface. Connect the other end to the Gigabit Ethernet.
Insert the LC plug of a fibre optic cable, which is available as acces-
Transmission|Rx:
sory, into this interface. Connect the other end to the Gigabit Ethernet.
11 · G&D DP1.2-Vision-IP-Fiber