Group 0 +(0-13 Kg) Installed In The Rearward Facing Position With 5 Point - BabySafe Golden Bedienungsanleitung

ur desired installation
with the ISO-FIX insert
insert guides which are
ds onto the two ISO-FIX
le.
nts are located between
he vehicle seat.
e vehicle seat to the
o pull out both locking
l the locking arm to and
which indicates they
*The insert guides make it easier to install the child safety seat with the aid of the
ISOFIX attachment points and prevent damage to the seat covering. When not in
rms,the button turn into
use, they should be removed and stored in a safe place. On vehicles with a folding
backrest the insert guides must be removed before the backrest is folded.Any
nstall the child
problems which occur are usually caused by dirt or foreign objects on the insert
attachment
guides and on the hooks. Clean of any dirt or foreign objects to remedy this type
at covering. When
of problem.
nd stored in a
backrest the
e the backrest is
e usually caused
t guides and on
n objects to
attachment
point
insert guide
instruction
Click
54
* The insert guides make it easier to install the child
safety seat with the aid of the ISO-FIX attachment
points and prevent damage to the seat covering. When
not in use, they should be removed and stored in a
safe place. On vehicles with a folding backrest the

7.1 Group 0 +(0-13 kg) installed in the rearward facing position with 5 point

insert guides must be removed before the backrest is
harness + vehicle belt
folded.Any problems which occur are usually caused
7.1.1 Pull the vehicle seat belt and pass the lap belt section through the red belt
guidance and under the sleeping cushion.
by dirt or foreign objects on the insert guides and on
7.1.2 Pass the diagonal seat belt section through the blue guidance on the back of
the hooks. Clean of any dirt or foreign objects to
the child seat.
remedy this type of problem.
7.1.3 Fasten the seat belt and pull it tight,ensure that the seat belt is not twisted.
Note:
7.1 Group 0 +(0-13kg) installed in the 1.The child seat must only be installed in
the rearward facing position and angle of
rearward facing position with 5 point harness
maximum inclination (Fourth level). For be
+ vehicle belt
sure the car seat has been installed in the
7.1.1 Pull the vehicle seat belt and pass the lap right place,please shake it before use.
belt section through the red belt guidance and
2.Don not twist the belt!
under the sleeping cushion.
3.Ensure the buckle tongues engage in
the vehicle seat buckle,you will hear an
7.1.2 Pass the diagonal seat belt section
audible CLICK!
through the blue guidance on the back of the
child seat.
7.1.3 Fasten the seat belt and pull it tight,en-
sure that the seat belt is not twisted.
Note:
1.The child seat must only be installed in the
rearward facing position and angle of
maximum inclination(Fourth level).For be sure
the car seat has been installed in the right
place,please shake it before use.
2.Don not twist the belt!
3.Ensure the buckle tongues engage in the
vehicle seat buckle,you will hear an audible
CLICK!
Click
instruction
Diagonal seat
belt section
Lap belt section
Diagonal seat
belt section
Lap belt section
55