Care For The Harness Buckle - BabySafe Golden Bedienungsanleitung

5.Approval child safety car seat .
Tested and certified according to ECE R 44/04 Group Body weight 0~36 kg
0 kg to 36 kg.
· The child safety seat has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment (ECE R
44/04). The test mark E (in a circle) and the certification number are located on
the orange certification sticker (sticker on the child safety seat).
· This certification will be invalidated if you make any modifications to the child
safety seat. ·The BabySafe Golden child safety seat must only be used to secure
your child in the vehicle. It must never be used as a seat or toy in the home.
Risk of injury due to unauthorized modifications!
Unauthorized technical modifications may reduce or entirely void the seat's
protective properties.
· Do not make any technical modifications to the child seat.
· Use the child seat only as described in these user instructions.
The 906 offers a variety of mounting options, the following table indicates the types
of installation for the respective groups:
Group Installation method
0+ (0-13 kg) Vehicle Belt
1 (9-18 kg) ISOFIX + Vehicle Belt
with 5-point harness
2, 3 (15-36 kg) Vehicle Belt
Child installation
5–point harness
5–point harness
Vehicle Belt
42
6. Care and maintenance
6. Care and maintenance
6.1 How to use the harness buckle
6.1.1 Guide the two buckle latches together
6.1 How to use the harness buckle
6.1.2 Make sure right side up
· Guide the two buckle latches together 6.1.2 Make sure right side up
6.1.3 Engage them before putting them into the
· Engage them before putting them into the harness buckle , this should make a
harness buckle , this should make a
CLICK noise.
6.1.4 Pull shoulder belts to remove all slack from
· Pull shoulder belts to remove all slack from the lap section ensuring the harness
the lap section ensuring the harness lies flat and
lies flat and harness buckle locked. Open the harness buckle by pressing the red
harness buckle locked. Open the harness buckle
button.
by pressing the red button.
Harness
buckle latch
chart 4

6.2 Care for the harness buckle

It is vital for the safety of your child that the harness buckle works correctly.
Malfunctions of the harness buckle are usually caused by accumulations of dirt or
foreign bodies.
Malfunctions are as follows:
· The buckle latches are ejected only slowly when the red release button is pressed.
· The buckle latches will no longer lock home (i.e. they are ejected again if you try
to push them in).
· The buckle latches engage without an audible CLICK.
· The buckle latches are difficult to insert (you feel resistance).
· The buckle
6.2 Care for the har
It is vital for the safe
harness buckle wor
the harness buckle
accumulations of d
CLICK noise. Malfunctions are as
· The buckle latch
when the red releas
· The buckle latch
(i.e. they are ejected
in).
· The buckle latch
CLICK.
right side · The buckle latch
feel resistance).
· The buckle only
wrong side
applied.
6.3 Remedy
Wash out the harne
properly once again
43