BabySafe Golden Bedienungsanleitung Seite 27

the correct height of
e it in the position
sing the adjuster.
6.11 Adjusting the headrest in Vehicle belt installation
A correctly adjusted headrest ensures that the diagonal seat belt section is optimally
positioned, and gives your child the optimal protection. The headrest must be
adjusted so that there is a space two fingers wide between the headrest and your
child's shoulders. To adjust the height of the headrest to fit your child:
6.11.1 Pull the headrest height adjuster and headrest at same time.This unlocks the
headrest.
6.11.2 You can now move the unlocked headrest to the desired height. As soon as
you release the adjustment ,the headrest will lock into place.
6.11.3 Place the child seat on the vehicle seat.
6.11.4 Have your child sit down in the child seat and check the height. Repeat this
process until the headrest is at the optimal height. If in the lowest position the
headrest is still too high, additional adjustment can be made through the shoulder
belt height adjuster as explained in section 6.9
he
o
en
ur
the headrest and your child's shoulders.
To adjust the height of the headrest to fit your
child:
6.11.1 Pull the headrest height adjuster and
headrest at same time.This unlocks the
headrest.
6.11.2 You can now move the unlocked
headrest to the desired height. As soon as you
release the adjustment ,the headrest will lock
into place.
6.11.3 Place the child seat on the vehicle seat.
6.11.4 Have your child sit down in the child
seat and check the height. Repeat this process
until the headrest is at the optimal height. If in
the lowest position the headrest is still too
instruction
52
7.Instruction
Please read the chapter with your desired installationmethod in chapter first.g
1. If your vehicle is not equipped with the ISOFIX insert guides as standard, clip the
two insert guides which are included with the seat
* With the cut-out facing upwards onto the two ISOFIX attachment points of your
vehicle.
TIP: The ISOFIX attachment points are located between the surface and the
backrest of the vehicle seat.
2. Move the head restraint on the vehicle seat to the upper position.
3. Pull out the ISOFIX adjuster to pull out both locking arms,from the under of base
pull the locking arm to and fro until you hear a CLICK sound which indicates they
are fully engaged.
4. On both sides of the locking arms,the button turn into green safety color.
53