Oscilloscope Functions And Specifications - Bosch FSA 500 Originalbetriebsanleitung

8.9.4 Oscilloscope measurement functions
Measurement Measuring
functions range
*)
5 kV - 50 kV
Secondary voltage
20 V - 500 V
Primary voltage
200 mV - 200 V
Voltage
200 mV - 5 V
AC coupling
2 A
Current
5 A
10 A
20 A
30 A
50 A
Current
100 A
200 A
1000 A
*) The measuring range is positive or negative depending on
the base line.
Robert Bosch GmbH
8.9.�
Sensors Function
Input coupling
CH1/CH2
Secondary
sensor
Input impedance
CH1/CH2 (to ground)
Connecting
cable term. 1
Input impedance
CH1/CH2 (electrically isolated)
Multi measurement
lead CH1 / CH2
Bandwidth
CH1/CH2 (to ground)
Connecting cable
B+/B–
Bandwidth
CH1/CH2 (electrically isolated)
Current probe 30 A
Bandwidth
1000 A current probe
Bandwidth
30 A current probe
Current probe 1000 A
Bandwidth
Secondary sensor
Bandwidth
Connecting cable term. 1
Time ranges
(referenced to 500 sampling
points)
Time ranges
(referenced to 1 sampling point)
Time base accuracy
Vertical accuracy
Device without sensors
R Offset error for ranges
R Offset error for ranges
Vertical resolution
Memory depth
Sampling rate per channel
(to ground)
Sampling rate per channel
Technical data | FSA ��� | ��

Oscilloscope functions and specifications

> 1 V
200 mV – 1 V
en
Specification
AC/DC
1 MOhm
1 MOhm (5 - 200 V)
10 MOhm (200 mV - 2V)
> 1 MHz = 200 mV - 2 V
> 5 MHz = 5 V - 200 V
> 100 kHz = 200 mV - 2 V
> 500 kHz = 5 V - 200 V
> 1 kHz
> 50 kHz
> 1 MHz
> 100 kHz (20 V)
> 1 MHz (50 V - 500 V)
10 µs - 100 s
20 ns - 200 ms
0,01 %
± 2 % of measured value
± 0,3 % of measuring
range
± 5 mV
10 bit
4 Mega sampling values
or 50 curves
40 Ms/s
1 Ms/s
|
1 689 989 115 2011-09-20