Product Description; Intended Use; Prerequisites For Operation With; Scope Of Delivery - Bosch FSA 500 Originalbetriebsanleitung

en 22 | FSA ��� | Product description
3.

Product description

�.1

Intended use

The FSA 500 is a portable tester for use in motor
vehicle workshops.
The FSA 500 is suitable for the checking of vehicles
with spark ignition, Wankel and diesel engines and
can be used for testing all the electrical and electronic
systems on passenger cars, commercial vehicles and
motorcycles.
The FSA 500 picks up vehicle-specific signals and
relays them via Bluetooth or the USB interface to a
PC/Laptop (not included in the scope of delivery).
FSA 500 CompacSoft [plus] must be installed on the
PC/Laptop.
!
The FSA 500 is not suitable for use as a measuring
instrument for test drives.
!
The maximum permissible measurement voltage at
the Multi measurement inputs is 200 V. The FSA 500
is therefore not to be used for checking isolation
from the supply on electric and hybrid vehicles.
FSA 500 CompacSoft [plus] features the following
functions:
R
Motor vehicle identification
R
Settings
R
Test steps for checking spark-ignition and diesel
engines
R
Multimeter measurements for voltage, current and
resistance
R
Signal generator (e.g. for checking sensors)
R
Component test (checking of vehicle components)
R
Characteristic curve tracer
R
4-channel/2-channel universal oscilloscope
R
Ignition oscilloscope Primary
R
Ignition oscilloscope Secondary
R
Insulation measurements with FSA 050
(special accessory)
For the assessment of measurement results, confirmed
"go" measurement curves can be stored as reference in
the measurement system.
|
1 689 989 115 2011-09-20
�.2

Prerequisites for operation with

FSA ��� CompacSoft [plus]
PC/Laptop with operating system WIN XP, WIN Vista
or WIN7 and at least one vacant USB interface for the
Bluetooth USB adapter or USB connecting cable.
Minimum requirements for PC/laptop:
R
CPU Intel / AMD Dual-Core 1.1 GHz or higher
R
RAM 1 GB
R
DVD drive
R
Minimum 5 GB available hard disk space
The current version of FSA 500 CompacSoft [plus]
must be installed on the PC/laptop or on DCU 130.
!
The FSA 500 CompacSoft [plus] software and
FSA 7xx/FSA 050 CompacSoft [plus] software can-
not be installed on DCU 130 or on PC/laptop simul-
taneously.
i
For motor vehicle identification via customer data or
key numbers as well as for control unit diagnosis with
CAS[plus], the latest ESI[tronic] software (Info type
A and C) must be installed on the PC/Laptop and
released. Control unit diagnosis is possible only with
a KTS module. This is subject to additional cost.
�.�

Scope of delivery

Designation
FSA 500
Power supply unit
with power cord
USB connecting cable (3 m)
Secondary measuring transducer
Clip-on trigger
Primary connecting cable, term. 1/15
Multi measurement lead CH1
Multi measurement lead CH2
Current probe 1000 A
Coupling with hose
Adapter cable for remote trigger
Connecting cable B+/B–
Passenger vehicle temperature sensor
Bluetooth USB adapter
Case
CompacSoft [plus] CD
DVD ESI[tronic]
Operating instructions
Important information and safety instructions 1 689 979 922
Test prod set
�.4

Special accessories

Information on special accessories, such as vehicle-
specific connecting cables, extra measurement leads
and connecting cables, can be obtained from your
authorized Bosch dealer.
Order number
1 687 023 586
1 687 023 592
1 684 461 106
1 684 465 562
1 687 225 017
1 687 225 018
1 684 461 176
1 684 460 288
1 684 460 289
1 687 225 019
1 686 430 053
1 684 463 828
1 684 460 286
1 687 230 068
1 687 023 449
1 685 438 644
1 687 005 084
1 687 729 601
1 687 729 605
1 689 989 115
1 684 485 362
Robert Bosch GmbH