Mechanical installation
3.
Mechanical installation
3.1
Housing D and E
The mechanical installation is dependent on the housing. The housing can be identified
through the 7th digit of the material number:
•
xxF5xxD-xxxx => housing D
•
xxF5xxE-xxxx => housing E
3.1.1
Demounting the device
2
1
Figure 1:
Preparing for Installation
•
lightly pick up the cover (3) at the cut-outs (4) and pull up
•
Remove cover plates (2)
•
Unscrew fixing bolt (1)
GB -10
3
4
Demounting of the device housing D and E
1 fixing bolt
2 Cover plate
3 Cover
4 Cut-outs