Accessories; Before Initial Use; Attaching The Wall Bracket - Cleanmaxx 01774 Gebrauchsanleitung

Collecting Container
4

Accessories

• Use the nozzle with scraper lip (6) to suck up dirty water on smooth surfaces such
a windows, tiles or mirrors.
• The crevice nozzle (11) is ideal for places which are hard to get to, such as corners,
crevices or recesses.
• The brush attachment (10) is used to remove dust from delicate objects such as
picture frames, lamp shades, keyboards, books etc.
• Use the wet nozzle (12) to remove wet dirt and small quantities of liquid on smooth
surfaces.
• The wall bracket is designed for storing the device in a space-saving manner.

Before Initial Use

1. Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
Never remove the rating plate and any possible warnings!
2. Attach the wall bracket (see the "Attaching the Wall Bracket" chapter).
3. Charge the battery (see the "Charging Up the Battery" chapter).

Attaching the Wall Bracket

PLEASE NOTE!
■ Use the fastening material supplied to hang up the wall bracket. If you are unsure
whether the fastening material supplied is suitable for the wall, seek advice from a
specialist stockist.
■ Hang the wall bracket in a secure and solid place.
■ Before drilling, ensure that there are no pipes or cables behind the intended drilling
point.
1. Drill a hole into the wall and place a dowel in it.
2. Screw the screw into the dowel. It should protrude by approx. 5 mm out of the wall.
3. Hang the wall bracket on the screw.
21
14 15
16
4 Collecting container
14 Insert
15 Filter
8 Main unit
16 Silicone plug
8
EN