Before Initial Use; Unpacking The Items Supplied; Assembling The Device; Inserting / Removing The Hose - Cleanmaxx XL-306E-220 Gebrauchsanleitung

Before initial use

Before you can use this device, you must:
• unpack the items supplied,
• assemble the device.

unpacking the items supplied

❐ Danger of suffocation! Keep the packaging material away from children and animals.
Unpack all parts and check the scope of supply for completeness (see the "Scope of supply
and overview of the device" chapter) and transport damage. If you find any damage to the
components, do not use them (!), but contact our customer service department.

Assembling the device

❐ Always turn off the vacuum cleaner before changing nozzles.

Inserting / removing the hose

Attaching the bracket to the telescopic tube

08190_DE-GB-FR-NL_V3.indb 22
Downloaded from www.Manualslib.com
PLEASE notE!
PLEASE notE!
The nozzles can be attached either to the telescopic tube or directly to the handle.
Insert the thicker end of the suction hose as illustrated into the
connection on the front of the device.
To remove the suction hose, press the two opposite buttons on the
connection and pull out the hose.
1. Push the bracket onto the telescopic tube (with the hook facing
towards the other end of the tube) and push it into the lower part
of the tube.
2. Secure the bracket by tightening the screw using an cross-head
screwdriver.
manuals search engine
22
20.11.12 15:17