E55-E82e_EN_DE_TR_EL_310309:07_55-90e_EN_ES_FR_PT.qxd
31.3.2009
14:35
Seite 40
EN
GB
Attention:
Turn power switch to "O" before inserting
or removing the needle.
Change the needle regularly, especially if it
is showing signs of wear and causing
problems.
Insert the needle as illustrated:
A. Loosen the needle clamp screw and
B. The flat side of the shaft should be
C/D.Insert the needle as far up as it will go.
Needles must be in perfect condition. (2)
Problems can occur with:
A. Bent needles
B. Blunt needles
C. Damaged points
Inserting the needle
tighten again after inserting the new
needle. (1)
towards the back.