Checking The Front Brake Shoes (Tt-R125 / Tt-R125E); Checking The Front Brake Pads (Tt-R125Lw / Tt-R125Lwe) And Rear Brake Shoes - Yamaha TT-R125E(Y) Bedienungsanleitung

PERIODIC MAINTENANCE AND ADJUSTMENT
turn the adjusting nut at the brake rod in
direction (a). To decrease the brake pe-
dal free play, turn the adjusting nut in
direction (b).
After adjusting the drive chain
slack or removing and installing
the rear wheel, always check the
brake pedal free play.
If proper adjustment cannot be
obtained as described, have a
Yamaha dealer make this
adjustment.
6
Checking the front brake
shoes (TT-R125 / TT-R125E)
EWAW0030
1. Brake shoe wear indicator
a. Wear
The front brake shoes must be checked
for wear at the intervals specified in the
periodic maintenance and lubrication
chart. The front brake is provided with a
wear indicator, which allows you to
check the brake shoe wear without
having to disassemble the brake. To
check the brake shoe wear, check the
position of the wear indicator while
applying the brake. If a brake shoe has
worn to the point that the wear indicator
reaches the wear limit line, have a
Yamaha dealer replace the brake shoes
as a set.
EAU22350
Checking the front brake
pads (TT-R125LW
/ TT-R125LWE) and rear brake
shoes
The front brake pads and the rear brake
shoes must be checked for wear at the
intervals specified in the periodic
maintenance and lubrication chart.
Front brake pads
a. Thickness
The front brake is provided with a check
plug, which, if it is removed, allows you
to check the brake pad wear without
disassembling the brake. If the lining
thickness is less than 0.8 mm (0.03 in),
have a Yamaha dealer replace the brake
pads as a set.
6 - 1 9
EAU22380
EAUW0460