Cleaning The Spark Arrester - Yamaha TT-R125E(Y) Bedienungsanleitung

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Sponge material
2. Washer
3. Nut
8. Install the sponge material onto the
frame, place the air filter element
in the original position on the guide,
6
and then tighten the wing nut.
9. Insert the air filter element into the
air filter case. NOTICE: Make sure
that the air filter element is
properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.
[ECA10481]
10.Install the air filter case cover by
installing the band.
11.Install the panel.
Checking and cleaning the air filter
case check hoses
1. Check hose 1
2. Check hose 2
1. Check the air filter case check
hoses for accumulation of dust or
water.
2. If dirt or water is visible, remove
the hoses, clean them, and then
install them.
6 - 1 1

Cleaning the spark arrester

The spark arrester should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
Always let the exhaust system
cool prior to touching exhaust
components.
Do not start the engine when
cleaning the exhaust system.
TIP
Make sure to select a well-ventilated
area free of combustible materials to
clean the spark arrester.
1. Cap
2. Spark arrester
EAUW0450
EWA10980