Adjusting The Front Fork (Tt-R125Lwe) - Yamaha TT-R125E(Y) Bedienungsanleitung

INSTRUMENT AND CONTROL FUNCTIONS
2. Place the seat in the original
position, and then tighten the bolts.
3. Install the panel.
TIP
Make sure that the seat is properly
secured before riding.
3
Adjusting the front fork
(TT-R125LWE)
1. Adjusting bolt
Always adjust both fork legs equally,
otherwise poor handling and loss of
stability may result.
This front fork is equipped with spring
preload adjusting bolts.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
3 - 7
EAU14721 thereby harden the suspension, turn the
adjusting bolt on each fork leg in
direction (a). To decrease the spring
preload and thereby soften the
suspension, turn the adjusting bolt on
each fork leg in direction (b).
Align the appropriate groove on the
adjusting mechanism with the top of the
front fork cap bolt.
Spring preload setting:
Minimum (soft):
4
Standard:
EWA10180
4
Maximum (hard):
1
ECA10101