B) V-Tail Mixer - Reely Cessna Bedienungsanleitung

b) V-Tail Mixer

For a plane model with V-tail, the elevators also have to perform the rudder function. For this reason, the V-tail mixer mixes the channels CH2 (elevator) and CH4
(rudder) so that the elevator or rudder control will always cause both servos to run.
The servo of the right rudder flap of the V-tail has to be connected to the receiver output CH4 and the servo of the left rudder flap of the V-tail to the receiver output
CH2. The deflections of the two rudder flaps have to be according to the figures in figure 17.
Figure 17
52