Cleaning And Maintenance; A) General - Reely T-MAX Bedienungsanleitung



11. Cleaning and maintenance

a) General

Before cleaning or servicing, switch off the speed controller ("OFF" position) and completely separate
the two rechargeable battery packs from the speed controller. If you have just operated the vehicle,
allow the engine, the speed controller and the battery packs to cool down completely first.
Clean the whole vehicle after using it. Remove dust and dirt using e.g. a long-haired clean brush and a vacuum
cleaner. Compressed air aerosols may also be helpful.
Do not use cleaning sprays or conventional household cleaners. They may damage the electronics and
lead to discolouration on the plastic parts or the body.
A soft, slightly moistened cloth can be used to wipe the vehicle body. Do not rub too firmly to avoid scratch marks.
At certain intervals maintenance work and function checks should be undertaken to ensure long-term trouble-free
operation and roadworthiness.
Motor vibrations and shocks when driving can loosen parts and screws. This is why you should check the tightness of
wheel nuts and all screws. The same applies to other parts of the vehicle.
Check if the tires sit correctly on the wheel rims or if the adhesions have loosened.
All ball bearings and gears in the vehicle have been provided with suitable lubricants by the manufacturer. Normally no
relubrication is necessary. However, the joints on the vehicle and the wheel bearings require occasional cleaning and
relubrication with suitable lubricants (available in accessory shops). The same applies when replacing drive parts or
gears.
It is imperative that you remove excessive oil or grease as dust can settle there very quickly.
If worn-out or defective vehicle parts must be replaced, use original spare parts only.
Make sure that no cables are bent or squeezed.
Check the model for damage before every use. If you notice any damage, the vehicle must not be used anymore and
has to be taken out of operation.
39